Product Categories

General Guidelines (ANSI/HI 9.1-9.5)
Item #M117
Scope: All industrial/commercial pumps including centrifugal, vertical, rotary and reciprocating. Covers types, definitions, design and application, airborne sound measurement and decontamination.
Member Price: $48.75 Price: $65.00

Qty:

Rotodynamic Pumps Guideline for NPSH Margin (ANSI/HI 9.6.1)
Item #A118
Scope: Recommendations for assessment of applied nozzle loads for horizontal end suction single stage, vertical in-line single stage, axial split case single and two-sage, and vertical turbine short set pumps.
Member Price: $60.00 Price: $80.00

Qty:

Rotodynamic Pumps for Assessment of Applied Nozzle Loads (ANSI/HI 9.6.2)
Item #A119
Scope: Recommendations for assessment of applied nozzle loads for horizontal end suction single stage, vertical in-line single stage, axial split case single and two-sage, and vertical turbine short set pumps.
Member Price: $56.25 Price: $75.00

Qty:

Rotodynamc (Centrifugal and Vertical) Pumps - Guideline for Allowable Operating Region (ANSI/HI 9.6.3)
Item #A120
Scope: Defines the "Preferred Operating Region" and "Allowable Operating Regions" for centrifugal pumps.
Member Price: $48.75 Price: $65.00

Qty:

Rotodynamic Pumps for Vibration Measurement and Allowable Values (ANSI/HI 9.6.4)
Item #A121
Scope: Evaluation of vibration where the vibration measurements are made on non-rotating parts of rotodynamic pumps; provides specific maximum allowable vibration values measured on bearing housings of rotodynamic pumps in field or factory tests.
Member Price: $86.25 Price: $115.00

Qty:

Rotodynamic (Centrifugal and Vertical) Pumps Guideline for Condition Monitoring (ANSI/HI 9.6.5)
Item #A122
Scope: Rotodynamic (centrifugal and vertical) pumps, both sealed and sealless designs. Discusses indicators that can be monitored to identify pump failure modes; provides a tool for condition monitoring of pumps in a pumping system.
Member Price: $56.25 Price: $75.00

Qty:

Rotodynamic Pumps for Pump Piping (ANSI/HI 9.6.6)
Item #A127
Scope: Applies to rotodynamic pump types in all world markets. Provides required/recommended practices to reduce risk of pump failure due to interaction with system;applicable to all piping downstream/upstream from pump.Complement to Pump Intake Design.
Member Price: $93.75 Price: $125.00

Qty:

Effects of Liquid Viscosity on Rotodynamic (Centrifugal and Vertical) Pump Performance (ANSI/HI 9.6.7)
Item #B131
Scope: Presents HI’s empirical method for predicting performance of rotodynamic pumps on Newtonian liquids of viscosity greater than that of water. Assists pump users in selecting pipe and estimating pipe performance on viscous liquids.
Member Price: $146.25 Price: $195.00

Qty:

Intake Design for Rotodynamic Pumps (ANSI/HI 9.8)
Item #A123
Scope: Provides designers/users of pumping facilities a foundation for developing functional/economical pumping facility designs. Establishes design requirements; provides intake design recommendations for both suction pipes and all types of wet pits.
Member Price: $168.75 Price: $225.00

Qty:

Rotodynamic Pumps for Hydraulic Performance Acceptance Tests (ANSI/HI 14.6)
Item #A136
Scope: This standard covers hydraulic performance tests for acceptance of rotodynamic pumps (centrifugal, mixed flow, and axial flow pumps). Information in the standard may be applied to pumps of any size and to any pumped liquids behaving as clear wat
Member Price: $146.25 Price: $195.00

Qty:

Rotodynamic (Centrifugal and Vertical) Pump Efficiency Prediction(HI 20.3-2010)
Item #A135
Scope: Estimate the efficiency of different types and sizes of rotodynamic pumps and evaluate the effect of surface finish, internal clearance, type of pumpage and mechanical losses on pump efficiency.
Member Price: $33.75 Price: $45.00

Qty: