Displaying 13 - 18 of 18 results
Intake Design for Rotodynamic Pumps (ANSI/HI 9.8-2012)
Scope: Ideally, the flow of liquid into any pump should be uniform, steady, and free from swirl and entrained air. Lack of uniformity through inlet connection can result in pumps not operating to optimum design condition and at a lower hydraulic efficiency.
Rotodynamic Centrifugal Slurry Pumps (ANSI/HI 12.1-12.6-2016)
Scope: ANSI/HI 12.1–12.6 offers a basic educational overview on rotodynamic centrifugal slurry pumps, design and application considerations related to the selection of the right pump for a specific industry including pump installation as well as operation and maintenance procedures.
Rotodynamic Pumps for Hydraulic Performance Acceptance Tests (ANSI/HI 14.6-2016)
This standard covers hydraulic performance tests for acceptance of rotodynamic pumps (centrifugal, mixed flow, and axial flow pumps), in this document referred to as pumps. ANSI/HI Standard 14.6 is intended for pump acceptance testing at pump test facilities, such as manufacturers’ pump test facilities or laboratories only. Industry experience shows that it is very difficult to perform measurements accurate enough to satisfy the acceptance requirements in this standard when testing is performed in the field.
Rotodynamic Pump Efficiency Prediction (HI 20.3-2015)
Scope: ANSI/HI 20.3 presents a simplified method to predict normally attainable efficiency levels at the best efficiency point for selected types of rotodynamic pumps when the rate of flow, total head per stage, net positive suction head available (NPSHA), and the service conditions are known.
Hydraulic Institute Standard for Methods for Rotodynamic Pump Efficiency Testing (HI 40.6-2014) - For Historical Reference
Scope: This standard is incorporated by reference in the Uniform Test Procedures for “Pumps” and “Dedicate Purpose Pool Pumps” as outlined in the Department of Energy - Energy Conservation Program (https://energy.gov/eere/buildings/standards-and-test-procedures). This standard established minimum testing protocols for testing of rotodynamic pumps for determination of pump efficiency in a uniform manner.
Hydraulic Institute Standard for Methods for Rotodynamic Pump Efficiency Testing (HI 40.6-2016)
Scope: HI 40.6 is intended to be used for efficiency testing at pump test facilities or laboratories only. Industry experience shows that it is very difficult to perform measurements accurate enough to satisfy the requirements in this standard when testing is performed in the field. Therefore field-testing is not permitted as a method of efficiency testing per this standard.
1 2